5.0 mm Pilot Drill Lower Part Must be used with: Angle-Cut

Must be used with: Angle-Cut Guide Sleeve - With Cleat - 3

The stainless steel 5

- CRESTAL SINUS ELEVATION WITH SAWBONE PRACTICE MODEL DEMONSTRATION

and Purpose: Bending Tool Protocol

5.0 mm Pilot Drill Lower Part Must be used with: Angle-CutAdvantages, Protocol, and Maintenance: 5. 0 mm Depth Stop Drill Manual The stainless steel 5. 0 mm Pilot Drill with tri spade pointed tip is designed to initiate the osteotomy through the dense cortical bone. It is recommended (not always necessary) to use the Flattening Drill prior to the Pilot Drill and start the dental implant osteotomy site preparation with the Pilot Drill. Caution: When the Pilot Drill becomes dull it should be replaced to